Say Goodbye To Wasted Water And High Utility Bills With This Toilet Fix

Say Goodbye To Wasted Water And High Utility Bills With This Toilet Fix

GoHero Home Services

A Guide to Troubleshooting a Running Toilet

Tired of listening to the soothing sound of H2O constantly cascading through your throne? A running toilet not only results in a waste of precious water but also leads to sky-high monthly bills. Don’t lose hope, champ! This is a common dilemma that can be resolved with a pinch of expertise and the proper tools.

Embark on a journey to troubleshoot and repair a running toilet. By following these steps, your throne will be operating like a well-oiled machine in no time.

Toilet Repair and ReplacementToilet Repair and ReplacementStep 1: Detective Work to Identify the Issue

The first step in mending a running toilet is to identify the root of the problem. There are several potential reasons for a running toilet, including a damaged flapper, a fatigued fill valve, or a troublesome flush valve. To determine the cause, you’ll need to employ your detective skills.

Step 2: Flush Out a Faulty Flapper

One of the most common causes of a running toilet is a faulty flapper. The flapper serves as a rubber valve that raises when you flush the toilet, allowing water to flow into the bowl, and then falls back into place to stop the flow of water. To inspect the flapper, simply raise the tank lid and examine it. If it’s cracked or worn, it’s time to swap it out.

Step 3: Fill Up with a Fresh Fill Valve

Another possible cause of a running toilet is a worn-out fill valve. The fill valve is responsible for replenishing the tank after each flush. To replace the fill valve, turn off the water supply to the toilet, drain the tank, and unscrew the old fill valve. Replace it with a new one, and you’re all set.

Step 4: Adjust the Flush Valve for a Smooth Flow

If the flapper and fill valve are functioning properly, it’s time to evaluate the flush valve. The flush valve manages the amount of water that enters the bowl after a flush. If the flush valve is set too high, it will result in a continuous flow of water into the bowl, causing a running toilet. To adjust the flush valve, simply turn the adjusting screw until the water stops running.

Step 5: Reassemble and Put Your Fix to the Test

Finally, reassemble the toilet, turn the water supply back on, and perform a test run. If the running water has ceased, congratulations! You’ve successfully troubleshot and fixed your running toilet like a pro.

Plumb Happy with a Smoothly Running Toilet

Fixing a running toilet is a manageable and straightforward task that can be accomplished by anyone. With a pinch of know-how and the proper tools, you can have your throne running smoothly and efficiently in no time. Happy plumbing!